AnelaTek Solutions Sdn Bhd is an innovative and unique security technology solutions provider based in Malaysia. We provide state-of-the-art security solutions for government agencies and medium to large commercial enterprises with a need for advanced security technology.
Different types of Ethernet LAN cables Ethernet cables are categorized into “CAT-N”(where “CAT” stands for category) based on bandwidth (measured in MHz), maximum data rate (measured in megabits per second) and shielding. Here are different type of Ethernet cables. Disclaimer – This post has only been shared for an educational and knowledge-sharing purpose related to […]
⭕ ETHERNET EXTENDER Ethernet cables range is limited, typically reaching around 100 M This can pose a challenge for situations where you need to connect devices beyond this distance or lack the ability to run new cables. Here’s where Ethernet extenders come in ✅ What is an Ethernet Extender? An Ethernet extender is a device […]
⭕ Network Cabling Copper: All copper-based ethernet channels have a maximum length of 100m and that length reduced on 25G and 40G to 30M as a maximum using CAT8 Disclaimer – This post has only been shared for an educational and knowledge-sharing purpose related to Technologies. Information was obtained from the source above source. All […]
RJ-45 Pinout A RJ45 connector is a modular 8 position, 8 pin connector used for terminating Cat5e or Cat6 twisted pair cable. A pinout is a specific arrangement of wires that dictate how the connector is terminated. There are multiple pinouts for RJ45 connectors including straight through (T568A or T568B), crossover, rolled, T1, and loopback. […]
What Is PoE in Networking? PoE Standards, Types and Power Levels “Power over Ethernet” delivers electrical power to PoE-enabled devices using your Ethernet network cables. Quick facts: POE TYPE 1 – Name: PoE – Standard: IEEE 802.3af – Maximum port power: 15.4W POE TYPE 2 – Name: PoE+ – Standard: IEEE 802.3at – Maximum port […]
What is Power over Ethernet (PoE)? Power over Ethernet (PoE) is the process of sending electrical power and data over copper wire. The combination of data transmission along with power-supplying hardware onto the same RJ45 Ethernet connector allows for the transmission of power over the network cabling. PoE networks can source power at the network […]
Before technology boost, we used almost 1GB of traditional network standards. NOW Businesses need more computing equipment, virtualized servers, and data centers as technology demands increase. As a result, excess data is generated, creating a rise from 1G to 10G demand. 10GBASE-T and SFP+ transceivers are two different technologies which transmit 10Gbs data via copper and fiber […]
PoE injector Vs PoE splitter? Power over Ethernet (PoE) allows an Ethernet cable to carry DC power as well as data signals to attached devices. POE Device Types: – Power Source equipment (PSE) supplies power to end devices “ex: switches”. – Powered Devices (PD) – These consume power provided by PSE. 1- PoE injector is a device which inject […]
IoT protocols: the language of machines for seamless communication 🤝 They’re the backbone of machine-to-machine (M2M) interaction. When talking about IoT networking protocols, we refer to a set of standards and rules that allow two entities to understand each other and exchange information. 💭 With layers like Application, Network, Transport, Physical, and Data Link, they keep everything […]
Stranded Conductor Vs Solid Conductor? Ethernet network cables like “cat5, cat6 etc…” come in stranded conductor and solid conductor formats. A solid conductor cable uses one solid wire per conductor, meaning, in 4-pair roll, there would be a total of 8 solid wires. A stranded conductor cables have a few small copper wires that are twisted […]